ΙΝΟΠΛΑΚΕΣ Ε0+
FIBER BOARDS E0+ – VERY LOW FORMALDEHYDE EMISSIONS FIBERBOARD E0+
These are innovative products intended for applications in "sensitive environments".
A special melamine-urea-formaldehyde (MUF) resin is used.
Fiberboard E0+ more than meets the requirements of the EN 120 specification.
What does E0+ mean?
It has the competitive advantage that the formaldehyde emission is less than 4.5 mg/100 g.
Where the E0+ fiberboards are used
Fiberboards of this category can find applications in:
- Hospitals
- Schools
- Children's stations
- Children's rooms
- Children's furniture
- Furnishing of business premises
| EN 622-5 : Fibreboards – Specifications – Part 5: Requirements for dry process boards (MDF) – Table 3: Requirements for general purpose boards for use in dry conditions (type MDF) | |||||
| ALFAWOOD GROUP | |||||
| QUALITY FEATURES MDF | |||||
| THICKNESS IN mm | |||||
| 6mm | 16mm | 19mm | Measurement methods | ||
| 1 | THICKNESS LIMITS (mm) | ±0.15 | ±0.2 | ±0.2 | |
| 2 | DENSITY (Kg/m3) | 820-780 | 740-700 | 740-700 | EN 323 |
| 3 | BENDING STRENGTH (N/mm2) | 27 | 25 | 25 | EN 310 |
| 4 | ELASTIC LIMIT (N/mm2) | 2700 | 2500 | 2500 | EN 310 |
| 5 | TENSILE STRENGTH (N/mm2) | 0.75 | 0.55 | 0.55 | EN 319 |
| 6 | INFLATION (%) | 30 | 12 | 12 | EN 317 |
| 7 | SCREW HOLD ON SURFACE (N) | – | 1050 | 1050 | EN 320 |
| 8 | SCREW RETAINER IN THE NUT (N) | – | 850 | 850 | EN 320 |
| 9 | MOISTURE CONTENT (%) | 4 % – 8 % | EN 322 | ||
| 10 | SURFACE ABSORPTION (mm) | ≥ 150 | EN 382-1 | ||
| 11 | FORMALDEHYDE CONTENT | ≤ 4.5 mg / 100 g | EN 120 | ||
